Artisan software 3.1 - Linux Mint 21 - Hottop B-2K 2/15—4/2/25

Artisan software 3.1 - Linux Mint 21 - Hottop B-2K
B2K00 To run artisan under Linux - must add user to dialout group
To run artisan under Linux - must add user to dialout group
B2K01 Start with factory reset, then config roaster
Start with factory reset, then config roaster
B2K02 Config / Machine for Hottop B-2K+
Config / Machine for Hottop B-2K+
B2K04 Config / Machine - with no changes, success
Config / Machine - with no changes, success
BK205 Correct port for my B-2K is F230X Basic UART
Correct port for my B-2K is F230X Basic UART
B2K06 Config / Autosave - Set up file naming and location
Config / Autosave - Set up file naming and location
B2K07 Config / Colors for Hottop B-2K+
Config / Colors for Hottop B-2K+
B2K08 Config / Curves / ROR - turn off projection of ROR
Config / Curves / ROR - turn off projection of ROR
B2K29 Config / Curves / Filters - change smoothing
Config / Curves / Filters - change smoothing
B2K10 Config / Curves / UI - Remove decimal places
Config / Curves / UI - Remove decimal places
B2K11 Config / Axes
Config / Axes
B2K12 Config / Device / Extra Devices eliminate LCD display for fan and heater
Config / Device / Extra Devices eliminate LCD display for fan and heater
B2K13 Config / Device / Symb ET/BT - offset 4 degrees so B-2K+ closer to old Hottop
Config / Device / Symb ET/BT - offset 4 degrees so B-2K+ closer to old Hottop
B2K14 Config / Events / Config - change default buttons
Config / Events / Config - change default buttons
B2K15 Config / Events / Buttons do NOT change
Config / Events / Buttons do NOT change
B2K16 Config / Events / Buttons do NOT change
Config / Events / Buttons do NOT change
B2K17 Config / Events / Sliders do NOT change
Config / Events / Sliders do NOT change
B2K19 Config / Events / Quantifiers do NOT change
Config / Events / Quantifiers do NOT change
B2K20 Config / Phases - set Maillard start at 280F
Config / Phases - set Maillard start at 280F
B2k21 Config / Alarms - load from profile
Config / Alarms - load from profile